Item #41345
Self Centering Doweling Jig
Assembly and Operating Instructions
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright 2000 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools.
For technical questions please call Harbor Freight Tools
at telephone number 1-800-444-3353.
Specifications:
Length: 4-3/4”
Height: 2-1/2”
Width: 4” Extended
Maximum Capacity: 2” Stock
Bushing Set: 2 each of 1/4”, 5/16” and 3/8”
.
Note: There are 4 holes along the top of the Jig. Only 2 of the holes accept threaded bushings. The other 2
holes accept 7/16” and 1/2” drill bits.
#41345
Page 1
REV 08/04
3. With the dowel holes precisely drilled, it is easy to assemble the two boards together. Put glue in the
holes and on the dowels. Insert the dowels into the holes and tightly clamp the boards until glue has dried.
4. The Self Centering Doweling Jig can be used to make accurate butt joints, miter joints, and edge joints,
as well as acting as a mortising guide.
Parts Listing
Part # Description
Qty
Part #
Description
Qty
1
2
3
4
5
6
7
Screw
Adjustment Nut
Washer
Rear Pressing Block
Screw Arbor
Bushing
2
1
2
1
1
6
1
8
9
10
11
12
13
Spring
Steel Ball
Guide Block
Leading Shaft
Front Pressing Block 1
1
1
1
2
Handle
1
Spring Screw
Note: There are 4
holes along the top of
the Jig. Only 2 of the
holes accept threaded
bushings. The other 2
holes accept 7/16” and
1/2” drill bits.
Parts Diagram
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTA-
TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO
THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTAL-
LATION OF REPLACEMENT PARTS THERETO.
#41345
REV 08/04
Page 3
#41345
REV 08/04
Page 4
|