IC618B
INSTRUCTION MANUAL
Contents
Warnings and Precautions ............................................................................... 2
Important Safety Instructions............................................................................ 3
In the Box & Features....................................................................................... 4
Powering the Unit & Changing the Remote Battery ......................................... 5
Docking an iPod ............................................................................................... 6
Playing an iPod & Tuning the AM/FM Radio..................................................... 7
Saving FM or AM Radio Stations to the Unit’s Memory.................................... 7
Location of Controls & Control Definitions................................................... 8-11
Service Information......................................................................................... 12
Important Safety Instructions
1. Read Instructions - All the safety and
operating instruction should be read before the
product is operated.
feature. If you are unable to insert the plug
receptacles as this can result in a risk of fire or
electric shock.
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes
plug.
19. Object and Liquid Entry - Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
2. Retain Instructions - The safety and
operating instruction should be retained for
future reference.
Alternate Warnings - This product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
3. Heed Warnings - All warning on the product
and in the operating instructions should be
adhered to.
20. Servicing - Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
4. Follow instructions - All operating and use
instructions should be followed.
5. Cleaning - Unplug this product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Clean only with a
dry cloth.
21. Damage Requiring Service - Unplug
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
point where they exit from the product.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
a) When the power-supply cord or plug is
damaged,
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the
like. The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
b) If liquid has been spilled, or objects have
fallen into the product,
14. Protective Attachment Plug - The product
is equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
c) If the product has been exposed to rain or
water,
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
8. Accessories - Do not place this product on
an unstable cart, stand tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding - If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size
of grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct change
in performance - this indicates a need for
service.
22. Replacement Parts - When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
9. A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
See figure:
See figure:
23. Safety Check - Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instruction have been adhered
to.
25. Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat. Battery shall not
be exposed to excessive heat such as sunshine,
fire, or the like.
16. Lightning - For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
26. Main plug is used as disconnect device and
it should remain readily operable during
intended use. In order to disconnect the
apparatus from the mains completely, the
mains plug should be disconnected from the
mains socket outlet completely.
11. Power Sources - This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to
the operating instruction.
17. Power Lines - An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
27. Excessive sound pressure from earphones and
headphones can cause hearing loss.
12. Grounding or Polarization - This product
may be equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
3
In the Box
Clock Radio
Docking System
iPod Brackets (8)
Remote Control
Features
•
•
•
•
•
•
•
Digital Tune AM/FM Stereo Radio
Station Memory Presets: 10 AM & 20 FM
Electronic Volume
Preset EQ
Last Station Memory
Mute Function
Certified iPod Connector installed for iPod dock-
ing.
Recharge Circuit for iPod/mini/nano/photo/video
Includes Brackets to fit iPod players
Controls connected iPod players
Line-In Jack, 3.5mm type
Digital Clock with Dual Alarm
•
•
•
•
•
•
•
•
•
•
•
•
Gradual Wake to iPod, Radio & Buzzer
Snooze Function
Sleep Function
Wake to tunes from your iPod
Remote Control Controls docked iPod players
Controls Radio Tuning & Volume
Uses CR2025 Button Cell Battery, included
Blue Backlit LCD Display
•
•
•
•
•
Full-Range Speakers built in
DC Jack: AC/DC Adaptor, UL Listed
Remote Control, Remote Battery included
Docking Brackets to fit different iPod Players
Powering the Unit
The unit can be powered by plugging it into a standard AC outlet (120V ~ 60Hz) using
the included AC/DC adaptor.
4
Using the Units Backup Battery
Insert a 9-Volt battery into the unit’s Battery Compartment to serve as a backup in case of a power failure.
(9-Volt Battery not included)
Please note, the backup battery is only meant to power the unit for a short period of time. It is not meant to
serve as the unit’s main power supply.
9-Volt Battery
RESET
Changing the Remote Battery
WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only
with the same or equivalent battery.
CR2025
OPEN
PUSH
1. Push the Release Button and pull out the Battery Compartment to access the battery.
2. Replace the old battery with an equivalent new battery (CR2025).
3. The positive side of the battery, as indicated by a plus symbol, must be facing up when inserted into the
remote.
5
Docking an iPod
1. Locate the numbered Bracket that fits the iPod that will be docked.
Each included Bracket has a number on it, indicating which iPod model that
bracket is compatible with. See the separate bracket chart page to identify which
bracket is needed.
2. Snap the Bracket into place over the iPod connector in the Docking Station.
All Brackets will only fit one way onto the Dock.
When inserting an iPod nano (first or second generation), slide the Dock
connection on the unit so that it matches the opening on the iPod nano (first or
second generation).
3. Connect the iPod to the iPod connector inside the Docking Station.
Once an iPod is connected to the Docking Station, the unit will charge the docked
iPod.
Please note, when the unit is in AM radio mode, a docked iPod will not charge.
6
Playing an iPod
1. Dock an iPod onto the unit.
2. Press the Standby/Al Off Button to turn the unit on.
3. Press the Function Button to switch the unit to iPod mode.
4. Press the Play/Pause Button to play and pause the docked iPod.
Tuning the AM/FM Radio
1. Press the Standby/Al Off Button to turn the unit on.
2. Press the Function Button to switch the unit to AM or FM radio mode.
3. Press the Skip/Search/Tuning Buttons to tune the AM or FM radio.
Saving FM or AM Radio Stations to the Unit’s Memory
1. After tuning the AM or FM radio, to the desired station, press the Enter/Memory
Button.
2. Press the AL 1/M+ Button and AL 2/M- Button to adjust the radio memory slot.
3. Press the Enter/Memory Button to save the current radio station to the selected
memory slot.
7
Location of Controls
1
9
2
3
10
11
4
5
6
12
13
7
8
14
15
16
RESET
8
Control Definitions
1
Dock for iPod
Use the Dock for iPod to connect an iPod to the unit.
2
Standby/Al Off Button
Press the Standby/AL Off Button to turn the unit off and on.
Press the Standby/AL Off Button to turn the unit’s alarm off after it sounds.
3
4
Volume Buttons
Press the Volume Buttons to adjust the volume of audio output from the unit.
AL 1/M+ Button
With the power off, press and hold the AL 1/M+ Button to set alarm 1.
Press the AL 1/M+ Button to cycle through saved radio stations.
5
6
7
8
9
Function/Band Button
Press the Function/Band Button to switch between AM radio, FM radio, iPod, and Aux modes.
Snooze Button
Press the Snooze Button to delay the alarm for an additional 6 minutes after it sounds.
FM Wire Antenna
Adjust the FM Wire Antenna to adjust the reception of the FM radio.
Auxiliary Input
Use the Auxiliary Input to connect an MP3 player or other audio device to the unit.
Clock/iPod Menu/Display Button
With the power off, press and hold the Clock/iPod Menu/Display Button to set the unit’s time.
Press the Clock/iPod Menu/Display Button to move backwards through the iPod’s menus in iPod mode.
Press the Clock/iPod Menu/Display Button to view the time when in radio mode.
10 Play/Pause Button
Press the Play/Pause Button to play or pause a docked iPod.
11 Skip/Search/Tuning/Time Button
Press the Skip/Search/Tuning/Time Button to skip between tracks on a docked iPod.
Press and hold the Skip/Search/Tuning/Time Button to search through an individual track on a docked iPod.
Press the Skip/Search/Tuning/Time Button to tune the AM and FM radio.
Press the Skip/Search/Tuning/Time Button to adjust the time when setting the clock and alarms.
12 AL 2/M- Button
With the power off, press and hold the AL 2/M- Button to set alarm 2.
Press the AL 2/M- Button to cycle through saved radio stations.
13 Enter/Memory Button
Press the Enter/Memory Button to make selections on a docked iPod.
Press the Enter/Memory Button to save the current AM or FM radio station to the unit’s memory.
14 DC Power Input
Use the DC Power Input to connect the unit to a power source such as a standard AC outlet (120V~60Hz).
15 Backup Battery Compartment (9-Volt Battery Required, Not Included)
16 Reset Button
Press the Reset Button using a paperclip or like object to restore the unit to its original manufacturers settings.
9
Location of Controls
17
18
28
29
30
19
20
21
31
32
22
33
23
24
25
34
35
36
37
26
27
38
39
Control Definitions
17 Sleep Button
Press the Sleep Button consecutively to set the sleep timer between 10-90 minutes in 10 minute incre-
ments.
18 Band Button
Press the Band Button to switch between AM and FM radio in radio mode
19 Power Button
Press the Power Button to turn the unit off and on.
20 Function Button
Press the Function Button to switch between AM radio, FM radio, iPod, and Aux modes.
21 Clk/Mem Button
With the power off, press and hold the Clk/Mem Button to set the clock.
Press the Clk/Mem Button to save the current radio station to the unit’s memory in radio mode.
10
Control Definitions
22 Tuning/Time Button
Press the Tuning/Time Button to tune the AM and FM radio when in radio mode.
Press the Tuning/Time Button to adjust the time when setting the clock.
23 Repeat Button
Press the Repeat Button to repeat the current audio track from a docked iPod.
Press the Repeat Button twice to repeat an entire album or playlist from a docked iPod.
24 Display Button
Press the Display Button to view the time when in radio mode.
25 Album Button
Press the Album Button to cycle through albums on a docked iPod.
26 Chapter Button
Press the Chapter Button to cycle through chapters on a docked iPod.
27 Alarm Set Buttons
Press the Alarm Set Buttons to set and activate alarm 1 and alarm 2.
28 Mute Button
Press the Mute Button to mute the volume of the unit.
29 iPod Button
Press the iPod Button to switch the unit to iPod mode.
30 EQ Button
Press the EQ Button to switch between rock, pop, classic, jazz, and flat equalizer settings.
31 Volume Button
Press the Volume Button to adjust the volume of audio output from the unit.
32 Select Button
Press the Select Button to make selections on a docked iPod.
33 Skip/Search Buttons
Press the Skip/Search Buttons to skip through tracks on a docked iPod.
Press and hold the Skip/Search Button to search through an individual song on a docked iPod.
34 Menu Button
Press the Menu Button to go back through the menus on a docked iPod.
35 M+/M- Buttons
Press the M+/M- Buttons to cycle through radio stations saved to the unit’s memory.
36 Play/Pause Button
Press the Play/Pause Button to play or pause a docked iPod.
37 Playlist Button
Press the Playlist Button to cycle through playlists on a docked iPod.
38 Shuffle Button
Press the shuffle Button to play songs from a docked iPod in a random order.
39 Snooze Button
Press the Snooze Button, after the alarm has sounded, to delay the alarm for 10 minutes.
11
Service Information
Address 2116 Carr Street, St. Louis MO, 63106
Phone
Fax
1-314-621-2881
1-314-588-1805
Email
Website www.ilive.net
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,
visit the Support section at
francés visite la sección de la ayu- ou le Français visitez la section de
© 2007 DPI, Inc. iPod not included. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. TruBass, SRS and the SRS
logo are trademarks of SRS Labs, Inc. All other trademarks appearing herein are the property of their respective owners.
|